wm2277hs help with washer

Here’s what the manual has to say regarding the LE code:

The connector (3-pin, male, white) in the MOTOR

HARNESS is not connected to the connector

(3-pin, female, white) of STATOR ASSEMBLY.

• The electric contact between the connectors

(3-pin, male, white) in the MOTOR HARNESS

and 4-pin, female, white connector in the MAIN PWB

ASSEMBLY is bad or unstable.

• The MOTOR HARNESS between the STATOR

ASSEMBLY and MAIN PWB ASSEMBLY is cut (open

circuited).

• The hall sensor is out of order/defective

If you have OHmed out the wire harness from the main PCB to the motor, and have checked the stator on the motor for signs of broken or loose wiring, then you can assume the PCB is bad.

via help with washer.